TrueMill Training Document

TrueMill® is the best roughing software for most applications and materials. TrueMill is proven to increase profits by dramatically reducing machine cycle times. Longer cutting tool life and higher quality parts are also a benefit of TrueMill.
Traditional high-speed machining uses smaller depths of cut and stepovers than regular tool paths. In dramatic contrast, TrueMill enables even greater depths of cut and stepovers at higher feeds and spindle speeds.
TrueMill maximizes the capabilities of your existing CNC equipment as follows:

TrueMill dynamically controls the tool’s engagement with the material to create fluid tool paths and eliminate spikes or sudden changes in tool load.

This steady tool engagement enables much more aggressive spindle speeds, feedrates, depth of cut, and stepover. Use speeds, depths, and stepovers that would damage the part or break the tool if used with traditional tool paths.

These aggressive parameters greatly reduce cycle times.

This steady engagement dramatically reduces tool wear and the smooth efficient manner in which material is removed is also easier on the machine which lowers machine maintenance costs.

Higher quality parts are also inherent with TrueMill. More heat is transferred to the chip, away from the part, resulting in much less part deformation.

 

Download the Manual